In a parallelogram steering linkage, the tie rods are parallel to what component?
What will be an ideal response?
The lower control arm.
You might also like to view...
Assuming they both have the same condenser temperature, which application requires more horsepower to produce a ton of cooling: a 0°F evaporator, or a 40°F evaporator?
A) The 0°F evaporator, because of the higher pressure difference B) The 40°F evaporator, because of its higher pressure C) The horsepower requirement is too complicated a calculation to make any valid comparison based only on evaporator and condenser temperatures. D) The horsepower requirement per ton of cooling is not affected by the evaporator temperature.
The logic gates required to implement the logic circuit in the preceding question would be:
A) an Exclusive OR gate with inputs B1 and B2 whose output is fed, along with input A, to an OR gate. B) an Exclusive NOR gate with inputs B1 and B2 whose output is fed, along with input A, to an OR gate. C) an Exclusive NOR gate with inputs B1 and B2 whose output is fed, along with input A, to an AND gate. D) an Exclusive OR gate with inputs B1 and B2 whose output, is fed along with input A, to an AND gate.
A horizontal offset is referred to as
Fill in the blank(s) with the appropriate word(s).
A(n) ____________________ is a device that serves as a temporary buffer memory.
Fill in the blank(s) with the appropriate word(s).