The valves could be bent if the timing belt breaks on which of these?
A) Freewheeling engine design B) Undersquared engine
C) In-block cam engine D) Interference engine design
D
You might also like to view...
Technician A says the ignition timing must retard as RPM increases. Technician B says ignition timing is retarded under maximum load. Who is correct?
A. Technician A B. Technician B C. Both A and B D. Neither A nor B
The most common form of isometric drawing is the ____.
A. long-axis isometric B. reverse isometric C. coordinate isometric D. regular isometric E. none of the above
Under what ecological conditions has continuous grazing worked best?
What will be an ideal response?
A V groove weld symbol showing (3/8) along with a 1/2 to the left of the symbol, both of which are under the reference line means ____.
A. the weld depth on the arrow side should be 3/8", and the root penetration should be 1/2" B. the depth that the weld penetrates the surface should be 3/8" on the arrow side and the root penetration should be 1/2" C. the depth that the weld penetrates the surface should be 1/2" on the other side and the root penetration should be 3/8" D. the depth that the weld penetrates the surface should be 1/2" on the arrow side and the root penetration should be 3/8" E. None of the above. This is an incorrect symbol.