MAP sensors read any pressure above a perfect vacuum.
Answer the following statement true (T) or false (F)
True
You might also like to view...
An unbalanced glulam beam can only be used as a single -span beam, while a balanced glulam beam can be used in all situations. Why then, are unbalanced glulam beams made?
What will be an ideal response?
Fluorescent lamps with a single pin at each end are known as _____.
a. instant-start lamps b. rapid-start lamps c. preheat lamps d. high-output (HO) lamps
for the case when the motor frequency is reduced to 50 Hz and the voltage sequence is reversed. Assume that the converter is a fixed v/f controller.
a. Motor current before the countercurrent braking b. Motor current just after the voltage sequence is reversed c. Current at the moment when the motor stops d. Motor torque at the condition of part (c) e. Motor current at the new steady-state point f. Motor torque at the new steady-state point g. Motor speed at the new steady-state point
On a starting relay, the component can be tested to see if it is electrically acceptable using a standard ________ or capacitance meter
A) ohmmeter B) multimeter C) ammeter D) voltmeter