What information do label diagrams provide?
A) They identify where all the manufacturer's data plates and model numbers are located on the system.
B) They explain how to read the labels on the equipment.
C) They identify the system operating voltage, minimum circuit ampacity, and maximum overcurrent protection.
D) They include a component location diagram and a wiring diagram.
D
You might also like to view...
After installing an air spring, there should only be one or two creases in the spring membrane.
Answer the following statement true (T) or false (F)
What is the best stage of openness for harvesting most flower species that have a spike-shaped inflorescence?
What will be an ideal response?
Which of the following is NOT part of a stall test procedure?
A) Run the engine at 2000 rpm for 2 minutes then turn OFF the key B) Shift the transmission into neutral and run the engine at 1000 rpm for at least 60-seconds following a stall test. C) Connect a tachometer and block the drive wheels D) Place the gear selector in gear and depress the accelerator making sure that the parking and service brakes are firmly applied
Which of the following defines a galvanic device?
A. produces voltage by chemical action B. induces voltage by inductance C. induces a static charge D. stores a capacitive charge