Which of these is a version of Byteflight that is a high-speed serial communication system for in-vehicle networks?
A) Flexray BUS B) Domestic Digital BUS
C) GMLAN D) CAN Network
A
You might also like to view...
When preparing a steam boiler for wet storage, the boiler is _____.
a. valved off from the remainder of the system b. filled with treated water below its normal water line c. filled with treated water to its normal water line d. valved open to the remainder of the system
Solar radiation is incident on a 5-m2 solar absorber plate surface at a rate of 800?W/m2. Ninety-three percent of the solar radiation is absorbed by the absorber plate, while the remaining 7 percent is reflected away. The solar absorber plate has a surface temperature of 40°C with an emissivity of 0.9 that experiences radiation exchange with the surrounding temperature of ??5°C. In addition, convective heat transfer occurs between the absorber plate surface and the ambient air of 20°C with a convection heat transfer coefficient of 7?W/m2•K. Determine the efficiency of the solar absorber, which is defined as the ratio of the usable heat collected by the absorber to the incident solar radiation on the absorber.
What will be an ideal response?
A vehicle pulls to one side when braking. This could be caused by all of these EXCEPT ________
A) Stuck caliper piston B) Bad master cylinder C) Restricted brake hose D) Unequal tire pressures
The single most important feature on electric furnaces is a/an __________ that exists between the blower motor and the electric heating elements.
A. sequencer B. fuse C. high limit D. interlock