Two angular addendums plus the _________________________ equals the outside diameter.
Fill in the blank(s) with the appropriate word(s).
pitch addendum
You might also like to view...
Consider that the compartments of the insulated box of Prob. 7.5 initially contain on one side a mole of ideal gas A and on the other side a mole of ideal gas B, with both gases at a pressure of 0.1013 MPa and a temperature of 298 K. Now assume that the partition is removed.
(a) How large will the enthalpy change be? (b) Compute the entropy change. (c) Compute the Gibbs free?energy change. Is the magnitude of this change significant? Explain.
Technician A places his finger over the breather hole when greasing a propeller shaft slip spline. Technician B says that to properly grease 5th wheel pivot pins when a tractor is coupled to a trailer, the weight on the 5th wheel should be relieved by cranking up the dolly legs. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B
A welding symbol consists of a circle whose center is at the middle of the reference line. Two lines go through the circle parallel to the reference line, one above the reference line and one below it. To the left is the notation 0.22 and to the right is the notation 3.44. What does this welding symbol signify?
A. This symbol means that a continuous spot weld is to be placed between or upon overlapping members. The width of the weld is to be 0.22 inches, and the length of the weld is to be 3.44 inches. B. This symbol means that a seam weld is to be placed between or upon overlapping members. The width of the weld is to be 3.44 inches, and the length of the weld is to be 0.22 inches. C. This symbol means that a seam weld is to be placed between or upon overlapping members. The width of the weld is to be 3.44 inches, and the penetration of the weld is to be 0.22 inches. D. This symbol means that a seam weld is to be placed between or upon overlapping members. The width of the weld is to be 0.22 inches, and the length of the weld is to be 3.44 inches. E. None of the above. This is an incorrect symbol.
To ensure your safety on the jobsite, you must stay alert, understand the hazards involved, and _____________________________________.
What will be an ideal response?