A spark tester should be used to check for spark because ________

A) It can detect a cracked spark plug
B) It can detect the gap of the spark plugs
C) It is connected to the CKP sensor to check its output
D) A spark tester requires at least 25,000 volts to fire


D

Trades & Technology

You might also like to view...

Follow the steps of the Systematic Approach of Section 14.4—that is, (1) identify the system, (2) determine whether the process is batch or rate, (3) construct a schematic diagram with inputs and outputs, (4) Label known material quantities or rates of flow and so on.

At the Grace Foods facility, a cereal product containing 53 percent water is produced at a rate of 750 pounds per hour. A dried product containing 75 percent cereal is desired. How much water must be removed in an eight-hour period and how much dried product is produced?

Trades & Technology

To avoid back strain while reading, writing or study, you should sit:

What will be an ideal response?

Trades & Technology

Technician A says that some vehicles with ESC continuously monitor wheel speed conditions and modulate hydraulic force to individual wheels to maintain stability. Technician B says that vehicles using traction control systems can reduce engine torque in slippery driving conditions. Which technician is correct?

A) Technician A only B) Technician B only C) Both technicians D) Neither technician

Trades & Technology

What is the most common form of switching used for mechanical thermostats?

A) Magnets B) Spring and bellows C) Mercury bulb D) Warped discs

Trades & Technology