When checking a set of duals for adequate spacing between them, which specific location MUST be checked?
A. 6 o'clock position
B. 12 o'clock position
C. both the 3 and 9 o'clock positions
D. both the 10 and 4 o'clock positions
Answer: A
You might also like to view...
The normal fan switch off temperature range is:
A) 85—90°F. B) 95—100°F. C) 140—150°F. D) 125—130°F.
____________________ is the condition when a device creates too large a load and severely affects the output by drawing too much current.
Fill in the blank(s) with the appropriate word(s).
What is the difference between input bias currents?
A) bias current differential B) slew rate C) input current D) input offset current
With the engine running, how is the PCM programmed to pulse the fuel injectors in a sequential fuel injection (SFI/SMPI) system?
A. Pulse all injectors simultaneously once each crankshaft revolution B. Pulse one half of the injectors simultaneously on each crankshaft revolution C. Pulse the injectors in pairs D. Pulse the injectors individually in the engine's firing order