Most type I systems are evacuated and charged at the factory through:
A) The king valve. B) The suction service valve.
C) Both the suction service and king valves. D) A process tube or process stub.
D
You might also like to view...
When working near scaffolding, it is best to _____.
a. walk around it b. walk underneath it to keep out of the way of falling material c. treat the area underneath as a shelter from the weather d. remove your hard hat to avoid having it catch on the supports as you pass underneath
Not all the groundwater remains available for use. The groundwater mixes with seawater and also flows into the sea below the surface. The infiltration, I, and removal of water from the watershed by subsurface groundwater discharge to the sea is shown in Table 3.13. Calculate, S, in the water budget equation account for all water available in BOTH groundwater and surface water storage.
Apply the water budget equation to evaluate the urgency of water management measures for the island nation of Malta. What will be an ideal response?
The frequency is known as ohms but many times, it is referred to as cycles.
Answer the following statement true (T) or false (F)
Technician A says that a torque arm is designed to support the weight of the vehicle. Technician B says that a torque arm is designed to prevent rear axle wind up. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician