What is a "chip trap"?
A) Too many chips are allowed to accumulate in the chip pan and on the floor, making a dangerous "chip trap" for the operator
B) A wad of stringy chips wrapped around the chuck or workpiece is know as a "chip trap"
C) A "chip trap" is simply a chip disposal device
D) An improperly ground tool or one that has been re ground many times often has a "chip trap" that prevents a smooth flow of chips across the tool face
D
You might also like to view...
Since your primary purpose in creating an auxiliary view is for clarity and not for confusion, ____ auxiliary views are the most common type of auxiliary views you will create.
A. vertical B. horizontal C. full D. partial
How would you remove the cam drive assembly on a push rod engine?
What will be an ideal response?
In which of the following fields do engineers work?
a. Design b. Sales c. Technical support d. Maintenance e. Customer service f. All of the above
The subsequent problems deal with the following PIC circuit and PicBasic code. Assume PORTB.2 is 0 to begin with.
I Var BYTE : J Var BYTEI = 1myloop:I = I + 1If (I > 2) Then loop2Low PORTB.2High PORTB.2Pause 100High PORTB.2Goto mylooploop2:J = 2 * (I/6+1)What happens to the LED during the execution of the entire code (from beginning to end)?
A. blinks (turns on and off) three times B. blinks (turns on and off) once C. turns on an stays on D. blinks (turns on and off) twice E. stays off