How can you check the clamp-on ammeter?
What will be an ideal response?
Compare the reading with an in-line ammeter of known quality.
You might also like to view...
How much must be invested now to grow to $30 000 in seven years if the annual interest rate is 4.0 percent compounded
(a) annually, (b) semiannually, (c) monthly?
____________________ is a measure of how much a fastener is being tightened and is measured in foot-pounds or inch-pounds.
Fill in the blank(s) with the appropriate word(s).
The amount of extra material needed for a bend to compensate for the compression during the bending process is called ____.
A. the bend relief B. the bend layout C. material bending D. allowance variable E. none of the above
In the figure above, the purpose of the M1 normally closed contacts shown in the control circuit is to _____
a. provide memory for the Start switch
b. prevent the drain pump from operating when the fill pump is operating
c. prevent the fill pump from operating when the drain pump is operating
d. provide memory for the float switch