What part of a typical AC motor is the structure that holds the internal components of a motor and motor mounts?
A) Shaft
B) Frame
C) Shroud
D) Rotor
Answer: B
Explanation: A) Incorrect. The shaft is a round metal tube that holds the rotor and is coupled to the driven end equipment.
B) Correct. The frame motor is the structure that holds the internal components of a motor and motor mounts.
C) Incorrect. The shroud is a casing over the motor that allows air to flow into and around the motor.
D) Incorrect. The rotor is the rotating member of a motor that is connected to the shaft
You might also like to view...
What is used to switch an electrohydraulic injector (EHI) used in a typical CR fuel system?
A. Pulse width modulated signal B. Analog voltage charge C. Fuel volume in accumulator D. Hydraulic distributor head
____________________ output modules are used for interfacing with discrete or integrated circuit (IC) TTL devices, LED displays, and various other 5 V DC devices.
Fill in the blank(s) with the appropriate word(s).
The parallel combination of a 330 ? resistor and a 470 ? resistor is connected in series with the parallel combination of four 1 k? resistors. If a 100 V source is connected across the circuit, then which resistor carries the most current?
A) 470 ? B) 330 ? C) 1 k?
When using datum targets to establish a complete datum reference frame, which three requirements should be met?
What will be an ideal response?