Convert AC power to DC power using _____.
a. diacs
b. NPN transistors
c. rectifier diodes
d. triacs
c. rectifier diodes
You might also like to view...
AutoCAD borders and title blocks can be found :
a. in the border folder b. in the layout tab c. in the acad template d. in the template folder
Write the equation that relates kw, pH, and pH.
What will be an ideal response?
Mr. Jones needs to find the height of a nearby tree. He measured the shadow of the tree to be 16 feet 9 inches at the same time his shadow was 3.2 feet. Mr. Jones’s height is 6feet. How tall is the tree?
What will be an ideal response?
(a) Load is applied to the three-hinged trussed arch in Figure P12.40 through the upper chord panel points by a floor beam and stringer floor system. Draw the influence lines for the horizontal and vertical reactions at support A and the forces or components of force in members BC, CM, and ML. (b) Assuming that the dead load of the arch and floor system can be represented by a uniform load of 4.8 kips/ft, determine the forces in bars CM and ML produced by the dead load. (c) If the live load is represented by a uniformly distributed load of 0.8 kip/ft of variable length and a concentrated load of 20 kips, determine the maximum force in bar CM produced by the live load. Consider both tension and compression. Joint E acts as a hinge.
