Identify the output and input variables in both the bottom-up and top-down strategies to cost estimation.
What will be an ideal response?
Bottom-up: Input = cost estimates; Output = required price
Top-down: Input = competitive price; Output = cost estimates
You might also like to view...
Of the choices listed, which is the best method of troubleshooting an instrumentation problem?
A. Replace components starting with the sensor or sending unit until the instrumentation is working correctly. B. Short the wiring at the associated sensor or sending unit to ground to determine if the wiring is OK. C. Pierce the wire insulation at the sending unit with a test light to determine if voltage is present. D. Use OEM-provided information and procedures to troubleshoot the cause of the instrumentation problem.
Answer the following statements true (T) or false (F)
Parameter, actions, constraints, and block tables are added to dynamic blocks in the block editor contextual tab.
Three major types of cutting fluids (liquids) are:
A) Semi-synthetic, emulsions, tram oils B) Lubricating oils, soluble oils and transparent emulsions C) Emulsion, synthetic and cutting oils D) Water, oil and emulsion
To protect the compressor during periods of hot pull down, a(n) ____ valve is used.
A. TXV (thermostatic expansion valve) B. EPR (evaporator pressure regulator) C. CPR (crankcase pressure regulator) D. LAC (low ambient control)