A(n) ____________________ signals an end to an email message using words such as "Thank you" or "Regards."
Fill in the blank(s) with the appropriate word(s).
closing
You might also like to view...
What are the two primary security protocols used by IPsec?
What will be an ideal response?
How does the relay agent redirect the replies from the DHCP server? Does it broadcast them or unicast them to the DHCP client?
What will be an ideal response?
In this questions, you will configure RIP V2 to the adjacent LANs, LAN-A to LAN-B, based on the network topology provided in Figure 1. You are to use the IP addresses provided in Table 1. You will be asked to verify that computers in your LAN can ping the neighbor LAN. You are configuring routing for both 10.10.12.0 and 10.10.30.0 networks. A subnet mask of 255.255.255.0 is being used. Note that a serial interface is being used to interconnect the LANs. Use 56000 for the clock rate on the serial link (DCE interface). The enable secret and line console 0 password should be set to ciscopress.
Table 1 Computer IP Addresses, Subnet Masks, and Gateway Addresses
1. Configure the gateway address for your LAN routers according to the addresses listed in Table 1. List the prompts and the commands used to configure the gateway address and subnet mask on each of the routers.
2. Configure the host name for your routers; R1 should be renamed LAN-A and R2 should be renamed LAN-B. List the router prompts and commands used to configure the router’s host name.
3. Configure the routers' interfaces and include any relevant interface-specific commands and associated IP addresses and enable each of them; for this lab R1's S0/0/0 interface is the DCE with a rate of 56,000 kbps. Use the proper command to verify that the interfaces are properly configured. List the router prompts and commands used to accomplish this task.
4. Configure a RIP V2 route for both the LAN-A and LAN-B routers. Use two commands to verify that the routes are configured. List the router prompts and commands used to accomplish this.
The point of profitability is the same as the break-even point
Indicate whether the statement is true or false