Ideally, each circulator in a system will establish a differential pressure and flow rates that is unaffected by the presence of another operating circulator within the system. This very desirable condition is called ____.
a. hydraulic equilibrium
b. hydraulic separation
c. the pump curve
d. ideal circulation
b. hydraulic separation
You might also like to view...
Explain the major differences between designing buildings for earthquake resistance and for wind resistance.
What will be an ideal response?
Give an example of each of the following processes:
a) mass change; b) phase change; c) structure change; d) deformation; e) consolidation.
If one end of the vehicle is raised, the wheel blocks should be placed at the wheel(s) on the other end of the vehicle.
Answer the following statement true (T) or false (F)
Technician A says that the best way to warm power steering fluid to operating temperature is to start the engine and then cycle the steering from full lock to full lock until the temperature exceeds 140 degrees. Technician A says that the maximum reading on a power steering flow meter will be observed when the gate valve is almost fully closed. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B