Technician A says that aftermarket parts must meet more demanding criteria than OEM parts. Technician B says that the cost of an aftermarket part may be about the same as an OEM part from the dealer. Which technician is correct?
A) Technician A B) Technician B C) Both technicians D) Neither technician
B
You might also like to view...
In a wood foundation, the framing is covered with a plywood skin, and the plywood is covered with ____ film for complete moisture proofing.
A. polyester B. polyethylene C. polypropylene D. PVC
After the band has been welded:
A) The teeth across the weld should be closer together for extra strength B) Any tooth spacing will be acceptable C) Tooth spacing across the weld should be the same as the rest of the band D) A small space should exist between the teeth across the weld
If a conductor is coiled as in a relay coil, then passing current through it will ________ the magnetic field
A) Coils should not be coiled. B) decrease C) intensify D) not change
The discus valve design is more efficient than a flapper valve design because ____.
A. it allows a compressor design with less clearance volume B. it operates with less spring tension C. the amount of expanded vapor in the cylinder is greater D. it will not allow liquid refrigerant in the cylinder