While diagnosing rear axle offset and sideset:
A. If the rear axle is offset so the thrust line is moved to the left of the geometric centerline, the steering pulls to the left.
B. When rear axle sideset occurs, one rear wheel is moved rearward in relation to the opposite rear wheel.
C. On a semi-independent rear suspension system, worn trailing arm bushings may cause rear axle offset.
D. On an independent rear suspension system, a worn lower ball joint may cause rear axle offset.
Answer: C
You might also like to view...
Which of the following is the recommended abrasive cloth used to clean cable during a splice?
a. 50-grit emery b. 75-grit abrasive cloth c. 100-grit emery d. 120-grit abrasive cloth
How are architectural and engineering scales divided? Provide examples of common units.
What will be an ideal response?
There are two things that a driver can do to prevent a roll-over. They are: (1) Go slow around turns. and (2):
a. Keep the cargo as close to the ground as possible. b. Keep the fifth wheel free-play tight. c. Make sure that the brakes are properly adjusted.
A direction of sight line is used with a true projection multiview because it would not be as clear as using a preferred revolution.
Answer the following statement true (T) or false (F)