____________________ assembly drawings, sometimes called layout drawings, are used to show the fit and function of all of the various pieces that go into a completed assembly or subassembly.
Fill in the blank(s) with the appropriate word(s).
Outline
You might also like to view...
A wind blows over the face of a person on a cold winter day. The temperature of the air is -5.0°C, while the person’s skin temperature is 35.0°C. If the convective heat transfer coefficient is 10.0 W/m2-K, and the exposed surface area of the face is 0.008 m2, determine the rate of heat loss from the skin via convection.
Given: Tf = -5.0oC; Ts = 35.0oC; h = 10.0 W/m2-K; A= 0.008 m2 What will be an ideal response?
The first CPU used in an IBM PC was the ____ ,which worked at about _____, or ____ clocks beat per second.
A. 8088, 4.77 MHz, 4,770,000 B. 4044, 133 MHz, 4,770,000 C. 8088,200MHz, 2,440,000 D. 4044, 400 MHz, 2,440,000
When the heat pump is in the emergency heat cycle, the ________
A) outdoor section will be energized, and the indoor section will be turned off B) compressor will be turned off and the auxiliary heat will be turned on C) reversing valve must be in the cooling mode
The decimal equivalent of the BCD value 1000 0110 is ________
A) 7610 B) 8810 C) 8610 D) 8110