The branch-circuit, short-circuit protection of a wound-rotor induction motor is required by Table 430.52 of the Code not to exceed 150% of the ____________________ running current of the motor.
Fill in the blank(s) with the appropriate word(s).
full-load
full load
You might also like to view...
Describe rough, blanked, and dressed lumber.
What will be an ideal response?
Si está utilizado un cepillo metálico sobre aluminio, usted debe utilizar:
a. un cepillo de aluminio. b. un cepillo de acero inoxidable que se ha utilizado en aluminio. c. un cepillo de acero dulce que se ha utilizado en aluminio. d. un cepillo de acero inoxidable.
A vehicle is being repaired after an airbag deployment. Technician A says that the inflator module should be handled as if it is still live. Technician B says rubber gloves should be worn to prevent skin irritation. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
A ____ connection is caused by the flux and oxidation particles staying between the solder pad and lead. It is the result of not enough heat.
A. cold solder B. rosin C. fractured or disturbed D. wicking