In a ____ configuration, the positive terminal of the first cell is connected to the negative terminal of the second cell; the positive terminal of the second cell is connected to the negative terminal of the third cell, and so on.

A. parallel
B. series-parallel
C. series-opposing
D. series-aiding


Answer: D

Trades & Technology

You might also like to view...

Explain the potential use of the SQC instruction for diagnostics.

What will be an ideal response?

Trades & Technology

Answer the following statement(s) true (T) or false (F)

1. When we say that the contents within an imaginary black box may be thevenized, we mean that they are reduced to the simple equivalent circuit. 2. Norton’s theorem is very similar to Thevenin’s theorem. 3. Norton’s theorem assumes that the source of current is divided among parallel branches. 4. Voltages sources are rated with some amount of voltage, such as 12 volts, 24 volts, and so on. 5. Power sources represented by a current source are connected to a perpendicular resistance that delivers a certain amount of current such as 1 ampere, 2 amperes, 3 amperes, and so on.

Trades & Technology

Where in the air conditioning system is the refrigerant a low pressure gas?

A) Evaporator outlet B) Condenser outlet C) Condenser inlet D) Evaporator inlet

Trades & Technology

The MIL is turned off under any of the following conditions, EXCEPT ________

A) PCM diagnostic link is grounded B) Codes are cleared with a scan tool C) Power to the PCM is disconnected D) Vehicle is driven on 3 consecutive trips with a warm-up cycle, without detecting a fault

Trades & Technology