One type of injection system does that does not hold pressure when turned off is called a non-checking system. This is found on ________
A) Some General Motors TBI systems B) None of these
C) All TBI systems D) Multiport injection systems
A
You might also like to view...
What component of mechanical refrigeration systems is a device used to increase the pressure of a refrigerant in the gas phase?
A) Receiver B) Compressor C) Evaporator D) Condenser
A manufacturing firm makes a production run of 3,750 pieces. Each piece is 78.30 millimeters long. The cost of material per meter of length is $2.40. Allowing 10% for waste and scrap, what is the material cost for the 3,750 pieces? Round to nearest dollar.
Fill in the blank(s) with the appropriate word(s).
A restricted canister vent valve could cause an OBD II DTC to be stored for "Evaporative Emission Control System Incorrect Purge Flow."
Answer the following statement true (T) or false (F)
After several seasons, buried oil tanks are very subject to water under the oil.
Answer the following statement true (T) or false (F)