When a parallelism tolerance (MMC) is applied to a feature of size, the deviation is often verified by passing the feature of size through a(n) ____________________ condition boundary.
Fill in the blank(s) with the appropriate word(s).
ANS: virtual
You might also like to view...
Probability of Error for complementary signals as function of ? sub “N”
The following worksheet specifies a 10-sample binary data signal s sub "1" in B4:B13. A random transmitted bit D sub "t" is computed in B1. The transmitted signal sT sub "i" (in C4:C13) = s sub "i" if Dt=1 and =-s sub "i" if D sub "t" =0. The Gaussian noise sequence N sub "i" SD on the first image is specified in F1. The detected signal X sub "i" is computed in E4:E13. The matched processor component s sub "i" X sub "i" is computed in F4:F13, and the matched processor output V is computed in F15. The detected bit D sub "r" is computed in D1.
The probability of error is estimated by computing the ratio of errors to transmitted data in I5 as the noise ? sub "N" varies from 0 to 14?? in steps of ?? specified in I1. The total number of data bits to be transmitted n sub "T" is specified in I2. The number of transmissions accomplished in shown in I3 and the number of errors in I4. Three VBA Macros are present:
• ResetCS resets the counts in I3 and I4.
• XmitCS increments the number of transmissions and, if an error occurs, increments the error count.
• AutoCS computes the P[error] for nT transmissions as ?N varies and displays the results in H8:I15.
a. What is the formula that computes Dt in B1?
b. What is the formula that computes the transmitted signal sT2 in C6?
c. What is the formula that computes the noise component N2 in D6?
d. What is the formula that computes the detected signal X2 in E6?
e. What is the formula that computes the processor component s2X2 in F6?
f. What is the formula that computes the processor output V in F15?
g. What is the formula that computes Dr in D1?
h. What is the formula that computes P[error] in I6 that produces 0 for #mits = 0?
i. Compose ResetCS.
j. Compose XmitCS.
k. Compose AutoCS.
What will be an ideal response?
____________________ should be mounted around the floor and work area to stop all movement when unauthorized personnel are detected in the work area during the operation.
Fill in the blank(s) with the appropriate word(s).
When applying duct insulation with the adhesive method, how far apart should strips of adhesive be
applied around the outside of a duct? a. 6 inches b. 8 inches c. 10 inches d. 12 inches
Determine the specific energy of air at 25oC, traveling at 35.0 m/s at a height of 10.0 m. Consider the specific internal energy of the air to be 212.6 kJ/kg.
Given: T= 25oC ; z = 10.0 m; V = 35.0 m/s; u = 212.6 kJ/kg Assume: g = 9.81 m/s2