When installing a 15 1/2-inch clutch assembly, Technician A uses guide studs installed in the flywheel to support the weight. Technician B uses a splined pilot shaft when installing both 14- and 15 1/2-inch clutch assemblies. Who is correct?
A. Technician A
B. Technician B
C. Both Technicians A and B
D. Neither Technician A nor B
Answer: C
You might also like to view...
When a part is a unit within itself, only one print is usually required to describe it.
Answer the following statement true (T) or false (F)
kW is a (quantity of electricity ________ / rate of electric power ________). KWH is a (quantity of electricity ________ / rate of electric power ________).
What will be an ideal response?
When a flexible metal chimney liner is used, the _____.
a. liner must always be insulated with transite b. liner may need to be a larger diameter than the correct size of smooth, rigid pipe c. liner can be sized in the same way as solid metal vents d. furnace must always be common-vented with the water heater
To make combustion efficiency tests, a hole must be made ____.
A. in the flue pipe after the draft control B. in the flue pipe before the draft control C. over the fire at the observation door D. under the draft hood