To show the location of studs to be welded in a straight line with equal center-to-center spacing, the spacing (pitch) dimension is applied on the ____________________ side of the stud-weld symbol.
Fill in the blank(s) with the appropriate word(s).
right
You might also like to view...
An insulated steam turbine receives steam at 5.0 MPa and 400°C, and the steam exits the turbine at 10 kPa with a quality of 0.95. The volumetric flow rate of the steam entering the turbine is 2.5 m3/s. Determine the power produced by the turbine
Given: P1 = 5.0 MPa; T1 = 400°C; P2 = 10 kPa; x2 = 0.95; V?1= 2.5 m3/s; Steam Assume: Q? = 0 (insulated) Also, for a turbine, assume steady-state, steady-flow, single-inlet, single-outlet flow, with ?KE = ?PE = 0 What will be an ideal response?
Diversity in the construction industry is increasingly being driven by _____.
a. civil rights b. consumer demands for construction projects c. OSHA requirements d. labor laws
?When performing procedure 2, care should be taken so as not to bend what part?
What will be an ideal response?
A typical evaporator temperature in an air conditioning system with 75° return air is:
a. 25° b. 40° c. 55° d. 75°