The suction pressure on a split AC system that is running with an excessive evaporator heat load
A) Will most likely pull into a vacuum B) Will be higher than normal
C) Will be lower than normal D) Is not affected by the load
B
You might also like to view...
An applicant's documentation of his or her formal training and/or prior work experience can be presented in written form on his or her ____________________
Fill in the blank(s) with correct word
A technician notices during a road test for a pulling complaint that the steering wheel is slow to return to center and requires higher than normal steering effort. The most likely cause of this condition could be:
A. A worn lower ball joint B. Tire pressure is set too high C. A loose outer tie rod joint D. An over-adjusted steering rack preload
The accompanying figure shows a bellows-operated ____________________ timer.
Fill in the blank(s) with the appropriate word(s).
If the refrigerant condensing saturation temperature is 100°F at the start of the process, what would the entering water temperature be?
A) 80°F B) 50°F C) 110°F D) 20°F