While discussing the transmission housing and/or case, Technician A says when removing parts from inside the case, pay close attention to the location of the check balls that may be in the hydraulic system. Technician B says that the case passages can be checked using high-pressure compressed air to determine leaks and cracks. Who is correct?
A. A only
B. B only
C. Both A and B
D. Neither A nor B
Answer: A
You might also like to view...
The most common construction materials for a fireplace and chimney are ____.
A. masonry and stone B. metal and stone C. masonry and metal D. stone and concrete
When installing an exposed grid ceiling system, the first component to be installed is the _____.
a. main runners b. hanger inserts and wires c. cross runners (tees) d. wall angle
After installing the lines and coil on a split-system heat pump, what steps must be taken before opening the unit installation valves?
A) Perform a leak test on the lines and coil and evacuate them. B) The system components come pre-evacuated, so the valves may be opened immediately after installing the lines and coils. C) Charge the lines and coil with refrigerant. D) Charge the lines and coil with refrigerant and perform a leak test.
A GAL16V8 has ________
A) 16 inputs and 8 variable outputs B) 16 inputs and 8 inputs or outputs C) 16 outputs and 8 inputs D) 16 outputs and 8 variable inputs