With the system operating, a technician gets a reading of 20 volts between the L1 and T1 terminals at the contacts of the contactor. This tells the technician that:
A) The contacts are defective because they have a measurable voltage drop.
B) The compressor is defective.
C) The contactor is operating correctly.
D) The transformer is defective because the voltage should be 24 volts.
A
You might also like to view...
Describe how a tool changing peripheral works.
What will be an ideal response?
What are the three components that have to operate when a residential air conditioning system is in the cooling mode?
What will be an ideal response?
An international aerospace contractor has been asked by a municipal police department to estimate and analyze the life cycle costs for a proposed drone surveillance system to monitor traffic patterns and congestion within the central thoroughfares of the city. The list of items include the following general categories: R&D costs (R&D), nonrecurring investment costs (NRI), recurring investment costs (RI), scheduled and unscheduled maintenance costs (Maint), equipment usage costs (Equip), and disposal costs (Disp). The costs (in $ million units) for the 20-year life cycle have been estimated. Calculate the annual LCC at an interest rate of 7% per year.
What will be an ideal response?
D/A converters output ideal voltages. The actual output will vary from the ideal output for several different reasons. Which of the following is NOT a factor in determining output voltage accuracy?
A) The precision of the resistor used in the summing amplifier output B) The precision of the resistors used in the summing amplifier input C) The number of logic input bits D) The precision of the input voltage level