Where a position tolerance is specified at ____________________, the tolerance zone is a virtual condition boundary located at the true position of a feature of size which the surface(s) of the feature of size must not violate.

Fill in the blank(s) with the appropriate word(s).


ANS: MMC

Trades & Technology

You might also like to view...

What type of injector is used in a Detroit Diesel ACRS system?

A. Hydraulically-amplified diesel injector (HADI) B. Poppet injectors C. Multi-orifii injectors D. electrohydraulic injectors (EHIs)

Trades & Technology

What is an advantage of integral seats?

What will be an ideal response?

Trades & Technology

Which of the following is true of  axial spray transfers using high current settings?

A. Higher currents are needed with smaller diameter wires. B. High current aids welding sheet metal because the high heat cuts through sheet metal. C. High current settings may cause the weld to be difficult to control in out-of-position welds. D. The need for higher current removes some restrictions on the process.

Trades & Technology

Four series resistors are connected across a 30 V source and carry 0.125 mA. If R1 = 10 k?, R2 = 33 k? and R3 = 47 k?, what is the value of R4?

A) 150 k? B) 1.5 k? C) 15 k? D) 150 ?

Trades & Technology