Which of the following is not a starting method?

A. autotransformer
B. wye-delta
C. automatic three-point
D. plugging


Answer: D

Trades & Technology

You might also like to view...

Problem 1.50 Determine the factor of safety for the cable anchor in Prob. 1.49 when P = 2.5 kips, knowing that a = 2 in. and b = 6 in. Problem 1.49 A steel plate 14 in. thick is embedded in a concrete wall to anchor a high-strength cable as shown. The diameter of the hole in the plate is 34 in., the ultimate strength of the steel used is 36 ksi and the ultimate bonding stress between plate and concrete is 300 psi. Know¬ing that a factor of safety of 3.60 is desired when P = 2.5 kips, determine (a) the required width a of the plate, (b) the minimum depth b to which a plate of that width should be embedded in the concrete slab. (Neglect the normal stresses between the concrete and the end of the plate.)

Trades & Technology

Vein clearing is a symptom common in:

a. viral diseases c. plant parasitic diseases b. bacterial diseases d. fungal diseases

Trades & Technology

A(n) ____________________ provides information vital to the proper selection and installation of the motor.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

A ________ assures carpenters, builders, and inspectors that wood materials used meet the minimum structural requirements of the IRC

A) CERT EXT rating B) Grade stamp C) Building standard D) Certification point

Trades & Technology