If a pin has a diameter of 70 mm and a tolerance of 1 mm, what is the range of possible sizes?
What will be an ideal response?
If the diameter of the pin of a part is 70 mm and the tolerance of that part is plus or minus 1 mm, then any one selected part could be as small as 69 mm, or as large as 71 mm.
You might also like to view...
When should DTCs be cleared?
A) After consulting TSBs B) After the repair has been verified C) After pinpointing a problem cylinder D) After the problem has been verified
Discuss the sequence that should be followed when installing all the panels in the front of the vehicle and discuss why this should be done.
What will be an ideal response?
?What quantity is measured in psia?
A. ?sensible heat B. ?absolute density C. ?absolute pressure D. ?active pressure
One of the disadvantages of using fiberglass ladders is that _____.?
A. they are weather resistant? B. they are lightweight? C. they are electrically nonconductive? D. they may produce splinters?