Nibblers prepare the edge of base metals using a _____

a. special grinding wheel
b. small grinding stone
c. reciprocating punch
d. toothed blade


c

Trades & Technology

You might also like to view...

The ____________________ knot is good for creating a loop, easy to tie and untie, and will not slip or

close up under tension.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

The kidneys form from the:

a. Mesoderm c. Ectoderm b. Endoderm d. Macroderm

Trades & Technology

Computer study of a two-hinged arch. The objective is to establish the difference in response of a parabolic arch to (1) uniformly distributed loads and (2) a single concentrated load.

(a) The arch in Figure P6.32 supports a roadway consisting of simply supported beams
connected to the arch by high-strength cables with area A = 2 in. 2 and E = 26,000 ksi. (Each
cable transmits a dead load from the beams of 36 kips to the arch.) Determine the reactions,
the axial force, shear, and moment at each joint of the arch, and the joint displacements. Plot
the deflected shape. Represent the arch by a series of straight segments between joints. The
arch has a constant cross section with
A = 24 in. 2 , I = 2654 in. 4 , and E = 29,000 ksi.
(b) Repeat the analysis of the arch if a single 48-kip vertical load acts downward at joint 18.
Again, determine all the forces acting at each joint of the arch, the joint displacements, etc.,
and compare results with those in (a). Briefly describe the difference in behavior.

Trades & Technology

Alfisols are of greater importance in semi-arid tropics than in the humid tropics

Indicate whether the statement is true or false

Trades & Technology