If sunlight cannot be kept off some parts of the building, make those surfaces as ____________________ as possible so that the least amount of heat is absorbed.
Fill in the blank(s) with the appropriate word(s).
reflective
You might also like to view...
What should you do to verify valve position?
A) Make sure there are no leaks B) Examine the valve for excessive wear C) Check that the correct type valve is used in the correct way D) Make sure the valve stems are properly lubricated
As with drilling compound-angular holes, ____________________ for machining compound-angular surfaces should not be used until the problem is completely visualized.
Fill in the blank(s) with the appropriate word(s).
The coefficient of performance of a heat pump operating in the heat mode tends to ____________________ as the outside air temperature drops.
Fill in the blank(s) with the appropriate word(s).
List the associations that establish national standards for the HVACR industry
What will be an ideal response?