The purpose of a fire damper is to:
A) Prevent the spread of smoke and fire throughout the building.
B) Provide a path for the smoke to exit the building in the event of a fire.
C) Regulate the amount of combustion air to a fuel burning appliance.
D) Regulate the draft in a fuel burning appliance.
A
You might also like to view...
?What is used to remove the material from a hole being drilled with a laser?
A. ?A jet of clean dry compressed air blasts the molten metal out of the hole. B. ?Laser drilling is always done overhead so the molten metal will run out of the hole. C. ?The intense heat vaporizes the spot with enough force to thrust the material out. D. ?The laser is hot enough so that it passes through the molten metal until the hole is completed and then the molten metal drips out.
For the two alternatives, demonstrate that the sum of the incremental cash flow series (Z ? X) over the LCM is equal to the difference in the sums of the individual cash flow series for X and Z.
Technician A says jumper wire "A" is used to check the motor's ground. Technician B says jumper wire "C" will cause the fan to run even with the switch off. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B
The force-deflection relationship for three springs are shown in the accompanying figure. What is the stiffness (spring constant) of each spring? Which one of the springs is the stiffest?