Annual Fuel Utilization Efficiency, AFUE, is:
A) Calculated by operating the furnace for one hour at the manufacturer's design condition.
B) The efficiency of the furnace for an entire heating season.
C) The cost of operating the furnace for an entire heating season.
D) Calculated by comparing a customer's gas bill to the calculated heat loss of their house.
B
You might also like to view...
Most research scientists in a specialized area usually earn all of the following degrees except:
a. graduate c. master's b. associate's d. bachelor's
____________________ breeds of horses have registration papers and parents of the same breed
Fill in the blank(s) with the appropriate word(s).
What maximum available moment strength for ASD can be developed in a W21 x 44 made of grade A992 steel?
What will be an ideal response?
To determine if the contacts inside a sequencer are faulty, the technician should energize the relay so the contacts are made and use an ohmmeter set to the RX1 scale. Which of these readings indicate that the sequencer must be replaced?
A) resistance between 0 and 0.1 ohm B) resistance less than .1 ohm C) resistance greater than 0.1 ohm D) resistance of 0 ohm