A bias value can be used to correct for steady-state error, but the bias value must be changed whenever the set point is changed or a new disturbance is present
Indicate whether the statement is true or false
TRUE
You might also like to view...
What is used to help keep the passenger compartment warm during idle -stop (start-stop) operation?
A) Operating the A/C in reverse to provide heating instead of cooling B) A larger than normal heater core C) An auxiliary electric water pump D) Larger than usual water jackets in the ICE
A tissue sample test involves collecting about ____ plants for parts to be used in testing
a. 10–15 b. 15–20 c. 20–25 d. 25–30
A ram is a double-acting cylinder in which the rod serves as the piston.
Answer the following statement true (T) or false (F)
Overheating can cause a terminal to discolor or the wiring insulation to melt. What should you consider when repairing the wire or the terminal?
A) It is recommended to replace the entire wire with another wire of the same of larger gauge. If the terminal is on a relay, sequencer, or fuse block, only the wire needs to be replaced. The component does not need to be replaced. B) It is recommended to replace the entire wire with another wire of the same of larger gauge. If the terminal is on a relay, sequencer, or fuse block, the component should also be replaced in addition to the wire. C) Replace the terminal end only. It is okay to cut off the end and repair the wire. If the terminal is on a relay, sequencer or fuse block, only the wire needs to be replaced. The component does not need to be replaced. D) Replace the terminal end only. It is okay to cut off the end and repair the wire. If the terminal is on a relay, sequencer or fuse block, the component should also be replaced in addition to the wire.