Specifications for diesel fuel include ________

A) Flash point B) Cloud point C) Pour point D) All of the above


D

Trades & Technology

You might also like to view...

Answer the following statement(s) true (T) or false (F)

1. The flat track repair can be made using either pieces of track from a similar type of board that has been scrapped or from commercial pieces of plain or tinned copper. 2. When the break is in excess of 1/8" (3.18 mm), it is recommended that the track being repaired be cut at 45°. 3. It is more difficult to hold a round wire in place onto a rounded surface. By slightly flattening the wire with serrated needle-nosed pliers, it will be easier to hold the wire in place. 4. The funnellette provides the most reliable type of repair for a double-sided board. 5. The soldering process should include the flow of solder from the lead to the eyelette to the pad, on both sides of a double-sided board.

Trades & Technology

Describe the types of projects that would be referred to as heavy construction. Explain what entities are usually responsible for such projects and why.

What will be an ideal response?

Trades & Technology

The junctions between the walls of a chimney and a steep roof need to be flashed. Which of the following flashings is required as chimney flashing?

A) Step flashing B) Apron flashing C) Cricket flashing D) All of the above E) Only A and C

Trades & Technology

When putting on a full-body harness, the D-ring should be located _____.

a. over the breastbone b. midway between the shoulders and waist c. between the shoulder blades d. at waist level

Trades & Technology