Horn relays are sometimes included in the horn circuit for which of the following reasons?
A. To allow the use of two horns in the circuit
B. To decrease the amount of current needed to activate the horn
C. To decrease the amount of current that flows through the horn switch
D. To allow the horn button to be placed on the end of a stalk on the steering column
Answer: C
You might also like to view...
Before a basement floor slab is poured, drainage to the perimeter drain should be ensured by installing a layer of coarse gravel with a depth of _____.
a. 3" b. 6" c. 8" d. 12"
What is the largest origin of nonpoint pollution in the United States?
a. Tobacco smoke c. Agriculture b. Manufacturing d. Automobile traffic
The use of an electronic throttle control (ETC) system allows the elimination of all of these EXCEPT ________
A) Accelerator pedal B) Idle air control C) Mechanical throttle cable (most systems) D) Cruise control actuator
The defrost air switch initiates a defrost cycle buy comparing:
A. The differential air pressure on either side of the condenser fan. B. The difference in air pressure between the condenser inlet and evaporator outlet. C. The difference in air pressure between the condenser outlet and evaporator inlet. D. The differential air pressure in either side of the evaporator coil.