Technician A says that when performing a stall test on an Allison hydromechanical transmission he places selector in the DR position on a deep ratio model. Technician B says that on a four-speed hydromechanical Allison transmission a stall test can be safely performed with the selector in D2, D3 or D4 positions. Who is correct?
A. Technician A only
B. Technician B only
C. Both A and B
D. Neither A nor B
Answer: B
You might also like to view...
Name the three areas used for marking an electrode
What will be an ideal response?
In the first (____________________) stage of composting, organisms that prefer moderate
temperatures begin the decay process, and the temperature begins to rise.
Fill in the blank(s) with the appropriate word(s).The neutral safety switch is located _________ in the starter electrical circuit
A) In the battery cable between the battery and the starter solenoid B) Between the ignition switch and the starter solenoid C) Between the starter solenoid and the starter motor D) Inside the ignition switch itself
Set-up time specifies ________
A) the minimum time for the control levels to be maintained on the inputs prior to the triggering edge of the clock in order for data to be reliably clocked into the FF B) how long it takes the output to change states after the clock has transitioned C) the maximum time interval required for the control levels to remain on the inputs before the triggering edge of the clock in order for the data to be reliably clocked out of the FF D) how long the operator has in order to get the flip-flop running before the maximum power level is exceeded