The sectional view is created by placing an imaginary cutting plane through the object as if you were to cut away the object and leave the area exposed.
Answer the following statement true (T) or false (F)
True
You might also like to view...
A low pitch rumble over 20 MPH (32 km/h) is likely caused by ________.
A) Incorrect gear oil or worn limited slip clutches B) Incorrect backlash or pinion depth C) Worn U-joints D) Worn carrier bearings
Technician A says that EUPs are mechanically-actuated by a cylinder block mounted camshaft. Technician B says that SMART injectors supplied by high pressure lines are used on current EUP fuel systems. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B
The distance in the x direction between two control points on a vertical aerial photograph is 6.2". If the distance between these same two points is 4.9" on another photograph having a scale of 1:24,000, determine the scale of the first vertical aerial photograph. If the focal length of the camera is 6"and the average elevation at these points is 300 ft, determine the flying height from which each photograph was taken.
What will be an ideal response?
Match each tire term with its correct definition below.
A. the body of a tire, made up of separate layers of rubber-cushioned cord B. the pattern of tire wear that has the same appearance as a cupped hand C. the part of the tire that hits the road D. the sealing material that keeps air in the tire