A spreadsheet template can be readily set up to provide the basic format of the calculation process; then the data applicable to the specific item of equipment can be inserted to generate the ownership cost of that item.
Answer the following statement true (T) or false (F)
True
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. The overload unit contacts are connected in parallel with the motor starter contactor unit control coil. 2. Electronic type of thermal overload units are adjustable for a range of motor load currents, and are set for the full load amperes (FLA) of the specific motor load. 3. When the melting alloy is a solid, the shaft of the ratchet wheel is held from turning. 4. When the bimetallic strip is heated, the metal with the lower thermal expansion characteristic will become longer, and cause the metal strip to bend.
A chain should be removed from service if any portion is worn by more than _____.
a. 15 percent b. 25 percent c. 40 percent d. 50 percent
How many thousandths of an inch of material should be left for a finishing cut, when roughing out a cavity?
A) .010 B) .030 C) .060 D) .080
Mixed format: 
(with a space between the whole number and the numerator)Fraction format: 
Reduce all fractions. A motor commutator 
inches in diameter is turned down to remove a flat spot. If 
inch is removed from the surface, find the finished diameter.
Fill in the blank(s) with the appropriate word(s).