When were recovery units required to be tested by a third party to prove they perform to EPA specifications?
What will be an ideal response?
November 15, 1993
You might also like to view...
Why is the process industry concerned with quality?
A) Customer retention will prove that products are of high quality B) Quality products and services are critical to the success of the organization C) It improves profitability of the organization D) It helps maintain or bolster the organization's reputation
Technician A says brake fluid should be filled to the top of the reservoir to be assured of proper brake pressure when the brakes are applied. Technician B says that the brake fluid level should be filled only to the maximum level line to allow for expansion when the brake fluid gets hot during normal operation. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
A MAF sensor on a General Motors 3800 V-6 is being tested for contamination. Technician A says that the sensor should show over 100 grams per second on a scan tool display when the accelerator is depressed to WOT (wide open throttle) on a running engine. Technician B says that the output frequency should exceed 7000 Hz when the accelerator pedal is depressed to WOT on a running engine. Which
technician is correct? A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Hint: 
In the series circuit, if the impedance is 70 ohms and the reactance is 50 ohms, what is the value of the resistance? Round the answer to the nearer ohm.
Fill in the blank(s) with the appropriate word(s).