What precautions should be observed when removing the valve body?
A) Use the proper valve body puller
B) Make sure to remove the valve body before removing the filter
C) Wash it with solvent before removing
D) Note the position of the bolts
D) Note the position of the bolts
You might also like to view...
Which sectional and economic groups generally supported the Federalists and which the Democratic-Republicans? Why?
What will be an ideal response?
What is the difference between a magnetoresistive (MR) sensor and a Hall sensor?
What will be an ideal response?
Answer the following statement(s) true (T) or false (F)
1. The National Standard Plumbing Code requires the water distribution system to be sized for a maximum velocity of 12 feet per second at the design flow rate. 2. Curb valves are located at the termination of the water service and provide isolation safety and maintenance capabilities for a structure. 3. Codes state that the maximum allowable pressure in a structure shall be limited to 80 psi under static conditions (no flow). 4. Riser valves are required when water lines pass through more than one floor. 5. Gray water systems shall never be connected to the water distribution system regardless of the degree of treatment.
What is the working pressure for medium and high pressure boilers?
What will be an ideal response?