During the vapor recovery phase what is pumped from the condenser to the storage tank?
A) cooling water B) low-pressure vapor
C) high-pressure vapor D) liquid refrigerant
D
You might also like to view...
____ gases in the laser beam cutting process react with the material being cut like an oxyfuel cutting torch.
A. Endothermic B. Nonreactive C. Reactive D. Exothermic
Asphalt roofing cement is usually available in _____.
a. 1-quart cans b. 1-gallon and 5-gallon pails c. 5-gallon and 10-gallon pails d. 55-gallon drums
With the ignition off and the key out of the ignition, what should happen if a technician uses a screwdriver to gently push on the throttle plate in an attempt to open the valve?
A) The throttle should move, and then spring back to the home position when released. B) The throttle should move closed, but not open further than the default position. C) Nothing. The throttle should be kept from moving by the motor, which is not energized with the key off. D) The throttle should move and stay where it is moved and not go back unless moved back.
List the steps in making oblique sketches with straight lines.
What will be an ideal response?