Removable insulation is used _____.
a. for access to equipment requiring maintenance
b. for easy removal when old insulation needs to be replaced
c. when regular insulation will not adhere to equipment surfaces
d. for possible reuse on other equipment
a. for access to equipment requiring maintenance
You might also like to view...
Two 90-degree outside bends are needed to prepare a square-welded, two-piece, 0.35 cm steel-plate machinery cover. The square pipe has an O/S wall measurement of 65.5 cm. Find, in centimeters, the length of each piece used for the weldment.
What will be an ideal response?
wound rotor motor has been recently put back into service but is now rotating in the wrong direction. After examining the motor, you find that lead L1 is connected to T2, L2 to T3, and L3 to T1. To correct the rotation, you should
a. Connect L2 to T1, L3 to T2, and L1 to T3. b. Connect L1 to T1, L2 to T3, and L3 to T2. c. Connect L1 to T1, L2 to T2, and L3 to T3. d. Reverse phase connections between the wound rotor and the resistor bank.
If a landscape company got a renewal of the maintenance contract for a property and the price for the renewal contract was 10 percent higher than the previous contract, the increase in price could be because they experienced an increase in their cost(s) of ____________________
Fill in the blank(s) with correct word
Assign the vehicle trips shown in the O-D trip table to the network in Figure 12.22, using all-or-nothing assignment. Make a list of links in the network and indicate the volume assigned to each. Calculate the total vehicle-minutes of travel. Show the minimum path and assign traffic for each of the five nodes.
What will be an ideal response?