What is double gladhand used for?
A. Testing trailer service pressure
B. Testing trailer supply pressure
C. Testing trailer service exhaust timing
D. All of the above
Answer: D
You might also like to view...
To show the location of studs to be welded in a straight line with equal center-to-center spacing, the spacing (pitch) dimension is applied on the ____________________ side of the stud-weld symbol.
Fill in the blank(s) with the appropriate word(s).
Quality, when referring to item installation, is not related to price.
Answer the following statement true (T) or false (F)
Answer the following statement(s) true (T) or false (F)
1. The convention for programming examples in the text uses Analog Memory to refer to a word address in a user memory area of the PLC containing a decimal value from calculations or values to be stored for comparison type instructions. 2. A digital address in the output memory area of the PLC that a real-world device is being controlled from, such as a pilot light, motor starter, or solenoid, is referred to as Digital Memory. 3. In most cases, there is more than one solution to a problem. The right solution and subsequent logic depends on having a thorough understanding of the machine or process to be controlled. 4. The accompanying figure shows a memory address labeled as Digital Input connected to the normally closed contact marked “Start Push Button.” 5. When controlling industrial motors with PLCs, it is often desirable to monitor and know when motor starters fail to operate as directed.
The piston is driven up and down in the ____________________.
Fill in the blank(s) with the appropriate word(s).