Name the general area of the drawing that is found at Zone 1A on page 5 of this book.

What will be an ideal response?


Title Block

Trades & Technology

You might also like to view...

Where technology is concerned, today's cutting edge is tomorrow's museum piece

Indicate whether the statement is true or false

Trades & Technology

Circular pitch is the distance from a point on one tooth to the corresponding point on the adjacent tooth, measured on the pitch circle.

Answer the following statement true (T) or false (F)

Trades & Technology

Extra caution should be exercised when working near common rail fuel systems because the fuel pressure could reach as high as:

a. 3000 psi b. 13,000 psi c. 30,000 psi d. 300,000 psi

Trades & Technology

If, while troubleshooting an R-410A residential air conditioning system at near design conditions, the operating pressures are found to be 118 psig on the low side and 440 psig on the high side, it is most likely that the system is

A. operating with a dirty air filter B. operating with a refrigerant overcharge C. operating with an undercharge of refrigerant D. operating properly

Trades & Technology