A 20th century date is assumed when a two digit year between ________ is entered in a worksheet cell
A) 10 and 79 B) 30 and 99 C) 20 and 89 D) 00 and 69
B
You might also like to view...
____________________ attaches to a work as soon as it is created.
Fill in the blank(s) with the appropriate word(s).
The command find / name "file?" print
a: displays the absolute pathnames such as file1, filea, fileA b: searches from the home directory c: searches from the current directory d: finds all files that have filenames such as myfile or yourfile e: all of the above
Discuss the various hardware features useful for implementing virtual memory systems.
What will be an ideal response?
In this lab, you are configuring EIGRP routing to the adjacent LAN for the network shown in Figure 1. You will be required to verify that computers in your LAN can ping the neighbor LAN. Note that a serial interface is being used to interconnect the LANs. You are configuring routing for both 172.20.15.0 and 192.168.25.0 networks. A subnet mask of 255.255.255.240 is being used. Use 56000 for the clock rate on the serial link (DCE interface).
Computer IP Addresses, Subnet Masks, and Gateway Addresses
1. Configure the gateway address for FastEthernet 0/0 and the serial s0/0/0 interfaces on Router R1. You also need to configure the IP and gateway address for computer PC1. Use the IP address and subnet mask specified in Table 1. You will need to enable each interface and set the clock rate on the serial interface to 56000. List the router prompts and commands used to configure the interfaces.
2. Configure the gateway address for FastEthernet 0/0 and the serial s0/0/1 interfaces on Router R2. You also need to configure the IP and gateway address for computer PC2. Use the IP address and subnet mask specified in Table 1. List the router prompts and commands used to configure the interfaces.
3. Configure the host name for your routers (R1 should be renamed LAN-A, and R2 should be renamed LAN-B). List the router prompts and commands used to configure the router’s host name.
4. Use the proper command to verify that the router in