Convert 90 psi to kPa and round up to the nearest of the following values:
A. 300 kPa
B. 600 kPa
C. 900 kPa
D. 1200 kPa
Answer: B
You might also like to view...
Gas caps are non-venting and usually have some type of ____________________ relief
Fill in the blank(s) with the appropriate word(s).
When producing a shop drawing, the first step is to _____.
a. determine the standard symbols for use, based on the specifications b. select a scale two to four times larger than the scale used for the design drawing c. properly locate all access doors, boots, fire dampers, and registers d. locate all ducts by dimensioning from the center line to the nearest column
Determine all bar forces and reactions for the truss in Figure P9.38.
The coolant flow through the radiator is controlled by the _________
A) Thermostat B) Water pump C) Size of the passages in the block D) Cooling Fan(s)