When an output gear is turning slower than the input gear, ____________________ is taking place.
Fill in the blank(s) with the appropriate word(s).
gear reduction
You might also like to view...
What is the primary purpose of a plumbing trap?
A) To prevent insects from entering the building. B) To have residual water for dissolving solids in the drain. C) To prevent sewer gas from entering the building.
What size of a junction box must be used if there is one 4" conduit and two 3" conduits entering on one side of the box and exiting at a 90° angle on another side of the box? (Assume the conductor size is No. 4 AWG or larger.)
a. 30" b. 48" c. 56" d. 60"
Where is the mixed air temperature measure on an air handler?
A) outside by the fresh air intake B) in the VAV box where the conditioned air and room air are mixed C) inside near the return air grille D) in the mixed air box after the outdoor air and return air are mixed
Describe how to make a template from tape before removing a nameplate.
What will be an ideal response?